Reference Guide
Detailed
Description
The bad block table is the table used for remapping bad disk blocks. This table fills as bad disk
blocks are remapped. When the table is full, bad disk blocks are no longer remapped, which
means that disk errors are no longer corrected. At this point, data loss can occur.
Recommended
Response Action
Replace the disk generating this message and restore from a backup copy. You may have lost
data.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 1 (Critical)
Trap/EventID 4345
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PDR58
Message
arg1
is incompatible.
Arguments
•
arg1 =
PD Name
Detailed
Description
A user attempted to replace a disk with another disk that is using an incompatible technology.
For example, replaced one side of a mirror with a SAS disk when the other side of the mirror is
using SATA technology.
Recommended
Response Action
Refer to the hardware documentation for information on replacing disks.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PDR59
Message A bad disk block was reassigned on
arg1
.
641