Reference Guide

Recommended
Response Action
Replace the physical disk with one of correct protocol (SAS, SATA) with at least the required
size. Force rebuild if it does not start automatically.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PDR56
Message Bad block table on
arg1 is 80% full.
Arguments
•
arg1 =
physical disk
Detailed
Description
The bad block table is the table used for remapping bad disk blocks. This table fills as bad disk
blocks are remapped. When the table is full, bad disk blocks are no longer remapped, which
means that disk errors are no longer corrected. At this point, data loss can occur. The bad
block table is now 80 percent full.
Recommended
Response Action
Replace the disk generating this message.
Category Storage
SubCategory PDR = Physical Disk
Severity Severity 2 (Warning)
Trap/EventID 4346
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
PDR57
Message Bad block table on
arg1 is full. Unable to log block arg2 .
Arguments
•
arg1 =
physical disk
•
arg2 =
logical block address
640