Reference Guide

NIC007
Message Configuration job already created, cannot create another config job on specified target until
existing job is completed or is cancelled
Detailed
Description
Configuration job already created on the specified target. No further command is allowed until
the existing job succeeded or the job is cancelled.
Recommended
Response Action
Wait for the job to complete; to continue with a configuration change, cancel the job and
proceed.
Category Configuration
SubCategory NIC = NIC Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC008
Message No pending data present to create a Configuration job
Detailed
Description
No changes are available between the previous configuration and the current configuration.
To create a Configuration job, at least one attribute should be changed
Recommended
Response Action
Change the configuration of one or more attributes and then create a configuration job.
Category Configuration
SubCategory NIC = NIC Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
NIC009
Message Lifecycle Controller is currently in use.
537