Reference Guide

Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC064
Message The value exceeds the maximum length of
arg1 characters for arg2 .
Arguments
•
arg1 =
max parameter length
•
arg2 =
parameter name
Detailed
Description
The maximum number of characters allowed for the parameter is displayed.
Recommended
Response Action
Reduce the number of characters to the maximum length allowed for this parameter.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC065
Message The iDRAC static IP address information is not fully configured. The missing attribute
InstanceID is arg1 .
Arguments
•
arg1 =
attribute key
Detailed
Description
The static IPv4 information for the iDRAC represented by the related iDRACCard Attributes
must be configured correctly.
Recommended
Response Action
Configure the iDRAC static IP address information by setting the related iDRACCard Attributes.
The related attributes that must be configured are the following:: 1) In the IPv4 group: Address,
NetMask, Gateway, DNS1 2) In the NIC Statiic group: DNSDomainName.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
465