Reference Guide

Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC012
Message Another process is using Lifecycle Controller.
Detailed
Description
Lifecycle Controller is in use by another process. Wait for other process to complete before
attempting to run another command.
Recommended
Response Action
Try one of the following: 1) Rerun the command after about 2 minutes. 2) Make sure that
Lifecycle Controller Unified Server Configurator or an Update Package is not currently running
on the server 3) Reset iDRAC and rerun the command.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
LC013
Message A configuration job cannot be created because there are no pending values to change.
Detailed
Description
No changes are available between the previous configuration and the current configuration. At
least one attribute should be changed to create a configuration job.
Recommended
Response Action
Change the configuration of one or more attributes before creating a configuration job.
Category Configuration
SubCategory LC = Lifecycle Contr
Severity Severity 3 (Informational)
440