Reference Guide

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0009
Message Unable to enable vFlash SD card.
Detailed
Description
The vFlash SD card is missing or not inserted correctly. iDRAC is not able to enable vFlash SD
card.
Recommended
Response Action
Reinsert the vFlash SD card and retry the operation. If the problem persists: 1) Turn off the
system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord,
turn on the system, and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0010
Message Invalid folder name or USB drive not found.
Detailed
Description
Operation failed because the folder name entered is incorrect or the USB drive is
disconnected.
Recommended
Response Action
Enter a valid folder name or attach the USB drive and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
419