Reference Guide

SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0007
Message Unable to load vFlash SD card settings.
Detailed
Description
Lifecycle Controller is unable to retrieve vFlash SD card information from iDRAC.
Recommended
Response Action
Reinsert the vFlash SD card and retry the operation. If the problem persists: 1) Turn off the
system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord,
turn on the system, and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0008
Message Unable to communicate with iDRAC.
Detailed
Description
An internal error occurred while communicating with iDRAC.
Recommended
Response Action
Exit the wizard and retry the operation. If the problem persists: 1) Turn off the system and
disconnect the power cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
418