Reference Guide

Recommended
Response Action
Reinsert or replace the vFlash SD card, or reset iDRAC, and retry the operation. If the problem
persists: 1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3)
Reconnect the power cord, turn on the system, and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0005
Message Internal error while retrieving update information.
Detailed
Description
Internal error while retrieving firmware version for the currently installed components. For
more information about the failure, see Lifecycle Log.
Recommended
Response Action
1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3) Reconnect
the power cord, turn on the system, and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0006
Message Unable to save vFlash SD card settings.
Detailed
Description
If a vFlash SD card is not present in the system or if the card is locked, Lifecycle Controller
cannot save the settings.
Recommended
Response Action
Insert the vFlash SD card or unlock the vFlash SD card and retry the operation.
Category Configuration
417