Reference Guide

Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC5036
Message A failure is detected on IO module
arg1 .
Arguments
• arg1 = number
Detailed
Description
The IOM module performance may be impact.
Recommended
Response Action
Contact technical support. Refer to your product documentation to choose the contact method
that is convenient for you.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
HWC5037
Message I/O module
arg1 failed to boot.
Arguments
• arg1 = number
Detailed
Description
The firmware on the I/O module did not boot. The problem may be because the I/O module is
not inserted correctly.
Recommended
Response Action
Reseat I/O module. If problem persists, contact the service provider.
Category System Health
SubCategory HWC = Hardware Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
402