Reference Guide
FC013
Message Invalid AttributeName:
arg1
.
Arguments
•
arg1 =
parameter name
Detailed
Description
An incorrect AttributeName parameter name was provided.
Recommended
Response Action
Enter the correct AttributeName available for the component in the system. Identify the correct
AttributeName from the attribute enumeration response for the component or refer to the FC
HBA Profile specification.
Category Configuration
SubCategory FC = Fiber Channel
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FC014
Message Invalid AttributeValue parameter content for corresponding AttributeName
arg1
.
Arguments
•
arg1 =
parameter name
Detailed
Description
The AttributeValue parameter is invalid due to one of the following: 1) The length of new
AttributeValue is not within the minimum length and maximum length range or does not comply
with the governing regular expression 2) Value of new AttributeValue is not within the lower
bound and upper bound range llimits 3) The value is not one of the possible values.
Recommended
Response Action
For valid attribute values, see the FC HBA Profile specification.
Category Configuration
SubCategory FC = Fiber Channel
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
362