Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FAN0026
Message The
arg1 sensor detected an error with a value of arg2 RPM.
Arguments
•
arg1 =
sensor name
•
arg2 =
fan speed
Detailed
Description
The fan sensor identified in the message indicates that the related fan has exceeded critical
RPM thresholds..
Recommended
Response Action
Remove and re-install the fan, or replace the fan with a new fan. If the issue persists, contact
your service provider.
Category System Health
SubCategory FAN = Fan Event
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FAN0027
Message The
arg1 sensor has failed with a value of arg2 RPM.
Arguments
•
arg1 =
sensor name
•
arg2 =
fan speed
Detailed
Description
The sensor identified in the message has failed. The sensor may be required for optimal system
performance.
Recommended
Response Action
Check the Embedded System Management (ESM) Log for any sensor related faults.If the fan
sensor has failed, replace the system board. For more information, contact your service
provider.
Category System Health
SubCategory FAN = Fan Event
Severity Severity 1 (Critical)
352