Reference Guide

Arguments
•
arg1 =
sensor name
•
arg2 =
fan speed
Detailed
Description
The sensor identified in the message has returned to a normal state.
Recommended
Response Action
No response action is required.
Category System Health
SubCategory FAN = Fan Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FAN0025
Message The
arg1 sensor state has changed to a warning state with a value of arg2 RPM.
Arguments
•
arg1 =
sensor name
•
arg2 =
fan speed
Detailed
Description
The fan identified in the message is not functioning correctly. The fan may be installed
incorrectly or may be failing.
Recommended
Response Action
Remove and re-install the fan, or replace the fan. If the issue persists, contact your service
provider.
Category System Health
SubCategory FAN = Fan Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
351