Reference Guide

SubCategory FAN = Fan Event
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FAN0021
Message
arg1 is offline.
Arguments
•
arg1 =
fan name
Detailed
Description
The fan identified in the meesage is removed. However, the fan may be required for optimal
system performance.
Recommended
Response Action
Re-install the fan, and open the OMSA Web interface to verify if the fan identified in the
message is displayed correctly. If the issue persists, contact your service provider.
Category System Health
SubCategory FAN = Fan Event
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
FAN0022
Message The
arg1 sensor has failed, and the last recorded value by the sensor was arg2 RPM.
Arguments
•
arg1 =
sensor name
•
arg2 =
fan speed
Detailed
Description
The sensor identified in the message has failed. The sensor may be required for optimal system
performance.
349