Reference Guide

Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
DIAG8005
Message LCD BIST not supported. or Fan - Fan speed failure. Expected at least
arg1 , observed arg2 LCD
BIST not supported. or Fan - Fan speed failure. Expected at least <RPM>, observed <RPM.
Arguments
•
arg1 =
RPM
•
arg2 =
RPM
Detailed
Description
Recommended
Response Action
If LCD BIST error: The LCD BIST may not exist on all systems. Make sure that the BIOS is
current and rerun the diagnostics. If Fan speed error: Insure fans are not dirty or obstructed
and check for a loose connection.
Category System Health
SubCategory DIAG = Diagnostic
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
DIAG8006
Message Fan - Unable to set fans to arg1 speed. or No chipset event timer!
Arguments
•
arg1 =
High, Low, or Original
Detailed
Description
Recommended
Response Action
Should not occur
298