Reference Guide

Severity Severity 2 (Warning)
Trap/EventID 4330
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
CTL76
Message A configuration command could not be committed to disk on
arg1
Arguments
• arg1 = Controller name
Detailed
Description
The controller encountered errors while applying the configuration on the physical disks. The
configuration command applied has not taken effect.
Recommended
Response Action
Re-issue the failed configuration command or try with a different set of physical disks. Contact
technical support if the problem persists.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 1 (Critical)
Trap/EventID 4329
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE TRUE TRUE FALSE FALSE FALSE FALSE
CTL77
Message Flash of new firmware image(s) completed on
arg1
Arguments
• arg1 = Controller Name
Detailed
Description
This alert message occurs if controller firmware is flashed successfully.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory CTL = Storage Contr
264