Reference Guide

Category Storage
SubCategory CTL = Storage Contr
Severity Severity 3 (Informational)
Trap/EventID 4331
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE TRUE FALSE TRUE FALSE FALSE FALSE FALSE
CTL4
Message
arg1 alarm is disabled.
Arguments
• arg1 = Controller name
Detailed
Description
You have disabled the controller alarm. This alert is provided for informational purposes.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory CTL = Storage Contr
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
CTL40
Message Multi-bit ECC error on
arg1 DIMM.
Arguments
•
arg1 =
Controller name
Detailed
Description
An error involving multiple bits has been encountered during a read or write operation. The
error correction algorithm recalculates parity data during read and write operations. If an error
involves only a single bit, it may be possible for the error correction algorithm to correct the
error and maintain parity data. An error involving multiple bits, however, generally indicates
data loss. In some cases, if the multi-bit error occurs during a read operation, then the data on
243