Reference Guide

SubCategory BOOT = BOOT Control
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BOOT012
Message Job started to attach and set vFlash SD card partition for OneTime boot.
Detailed
Description
A job was created to configure a OneTime boot to the specified vFlash SD card partition. If this
partition was not attached to the system, the job attaches it as well.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory BOOT = BOOT Control
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
BOOT014
Message Virtual media not ready.
Detailed
Description
The systems SD card has been removed or is in use.
Recommended
Response Action
Verify that the SD card is inserted and that another operation is not in progress, and try again.
Category Configuration
SubCategory BOOT = BOOT Control
Severity Severity 3 (Informational)
Trap/EventID FALSE
200