Reference Guide

Detailed
Description
An error occurred while initializing the SD card because the SD card write-protection feature
is enabled.
Recommended
Response Action
Move the SD card write-protection tab to the disabled position and try again.
Category Configuration
SubCategory VFL = vFlash Event
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
VFL0712
Message One or more partitions are busy with another operation; the SD card could not be initialized.
Detailed
Description
none
Recommended
Response Action
Retry the task after a few minutes
Category Configuration
SubCategory VFL = vFlash Event
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
VFL0713
Message One or more partitions are currently attached; the SD card could not be initialized.
Detailed
Description
none
Recommended
Response Action
Detach the partitions and try again.
1418