Reference Guide

Detailed
Description
Remote access controller firmware and configuration import in progress.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
BAR083
Message Host System Model does not match the Backup file System Model information.
Detailed
Description
System profile backup file validation failed because the host system model information does
not match the value stored in the file.
Recommended
Response Action
Obtain a valid host system backup image and try the operation again. Reboot the remote
access controller and try the operation again. If the error continues, download a new remote
access controller firmware image and try the operation again.
Category Configuration
SubCategory BAR = Backup/Restore
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
BAR084
Message Host System Service Tag does not match the Backup file Service Tag.
Detailed
Description
System profile backup file validation failed because the host system service tag information
does not match the value stored in the file.
127