Reference Guide

Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0130
Message Trap at specified index is not currently enabled.
Detailed
Description
The Trap needs to be set for the particular index for the testtrap to go through.
Recommended
Response Action
Set cfgIpmiPetAlertEnable in cfgIpmiPet group using config subcommand for the
corresponding index.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0131
Message Trap destination address must be configured.
Detailed
Description
The destination Ip address must be configured for the Trap.
Recommended
Response Action
Set cfgIpmiPetAlertDestIpAddr in cfgIpmiPet group using config subcommand for the
corresponding index.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
1215