Reference Guide

Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0106
Message The -u option is not supported on the current RAC configuration.
Detailed
Description
The specified option is not supported on the RAC.
Recommended
Response Action
No response action is required.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0107
Message More than one option is not allowed with this command.
Detailed
Description
The command takes in only one option which is the Session ID.
Recommended
Response Action
Enter the command only with one option i.e. the Session ID
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
1204