Reference Guide

SWC0284
Message Failed to set the object value. \nPossible reason may be that Local Configuration using
RACADM is disabled.
Detailed
Description
Local Configuration using RACADM may be disabled.
Recommended
Response Action
Check if the Local Configuration using RACADM is disabled and enable it through GUI.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0285
Message Object value is invalid.
Detailed
Description
The value given for the object is not valid.
Recommended
Response Action
Enter a valid value for the corresponding object.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0286
Message Modifying the user configuration at index 1 is not allowed.
1183