Reference Guide

Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0261
Message The specified option is not supported with the interface being used.
Detailed
Description
The option requested is not available on the interface being used.
Recommended
Response Action
Refer to the help to get the list of commands/options valid for the interface.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
SWC0262
Message Unable to perform operation. Please make sure RAC controller and \nappropriate IPMI drivers
are installed.
Detailed
Description
The IPMI drivers or the RAC contorller may not be installed.
Recommended
Response Action
Check if the required modules are installed.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
1172