Reference Guide

SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0049
Message Unable to continue the Import operation.
Detailed
Description
The Import operation cannot continue because backup image file is not present on the vFlash
SD card, the image is invalid, or the entered passphrase is incorrect.
Recommended
Response Action
Make sure that the backup image file is present on the vFlash SD card, the image is valid, and
the entered passphrase is correct.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0050
Message Unable to initiate Import operation.
Detailed
Description
Unable to initiate Import operation since iDRAC is not responding.
Recommended
Response Action
Retry the Import operation using a valid backup image file and the correct passphrase. If the
problem persists, do the following: 1) Turn off the system and disconnect the power cord. 2)
Wait for five seconds. 3) Reconnect the power cord, turn on the system, and retry the
operation.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
1159