Reference Guide

Recommended
Response Action
Retry the operation. If the problem persists, do the following: 1) Turn off the system and
disconnect the power cord. 2) Wait five seconds. 3) Reconnect the power cord, turn on the
system, and retry the operation.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0045
Message Unable to complete the Import operation.
Detailed
Description
The Import operation did not successfully complete. For more information, see the Lifecycle
Log.
Recommended
Response Action
Exit the Import Server Profile wizard and retry the operation. If the problem persists, do the
following: 1) Turn off the system and disconnect the power cord. 2) Wait for five seconds. 3)
Reconnect the power cord, turn on the system, and retry the operation.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0046
Message Unable to initiate Import operation.
Detailed
Description
Unable to initiate Import operation since another Import operation is already in progress.
Recommended
Response Action
Wait until current Import operation is complete before initiating a new Import operation.
1157