Reference Guide

LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0066
Message Unable to connect to the Network Share.
Detailed
Description
Unable to connect to the Network Share due to one of the following: 1) Login credentials
entered are incorrect. 2) Network is inaccessible. 3) System IP address conflicts with another
system on the network.
Recommended
Response Action
Verify the login credentials. Make sure the Network Share is accessible and the system IP
address does not conflict with any other system on the network. If the problem persists,
perform an AC power cycle and retry.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0035
Message Unable to initialize backup Server Profile operation.
Detailed
Description
The backup operation did not initialize because the system does not have a service tag.
Recommended
Response Action
Assign a service tag to the system and retry the operation. To assign the service tag, contact
your service provider.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
1152