Reference Guide

SWC0013
Message Unable to save the front panel security settings.
Detailed
Description
The oepration to save the front panel security settings encountered an unexpected error while
communicating with iDRAC.
Recommended
Response Action
Retry the operation. If the problem persists: 1) Turn off the system and disconnect the power
cord. 2) Wait for five seconds. 3) Reconnect the power cord, turn on the system, and retry the
operation.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0014
Message Unable to set new date and time.
Detailed
Description
Unable to apply the changes to the date and time settings because an internal error occurred.
Recommended
Response Action
Exit the Date and Time wizard and retry the operation. If the problem persists, exit Lifecycle
Controller and retry the operation.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. FALSE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0015
Message Unable to retrieve the list of supported operating systems.
1142