Reference Guide

Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR0209
Message Unable to monitor or manage SAS components because the initialization sequence of the
devices did not complete.
Detailed
Description
The initialization sequence of SAS components did not complete during system startup.
Recommended
Response Action
Do the following: 1) Make sure that the supported versions of the SAS drivers and firmware are
installed. 2) Reboot the system. If problem persists, reinstall Server Administrator and Storage
Services on the managed node to make sure all the required components are installed.
Category Storage
SubCategory STOR = Storage
Severity Severity 1 (Critical)
Trap/EventID FALSE
LCD Message No LCD message display defined.
Initial Default. TRUE
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
DONTKN
OW
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
STOR0210
Message SCSI sense data (
arg1 ) received from arg2 .
Arguments
•
arg1 =
sense info
•
arg2 =
device name
Detailed
Description
A SCSI device may have experienced an error that generated sense data after the device
recovery.
Recommended
Response Action
No response action is required.
Category Storage
SubCategory STOR = Storage
Severity Severity 3 (Informational)
Trap/EventID FALSE
LCD Message No LCD message display defined.
1068