Reference Guide

ManualsBrandsDell ManualsActive System ManagerOpenManage Software 7.2

Dell OpenManage Systems Management Software

Version 4.0 Compatibility Matrix

Summary of content (29 pages)

PAGE 1
Dell OpenManage Systems Management Software Version 4.
PAGE 2
Notes, Cautions, and Warnings NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates either potential damage to hardware or loss of data and tells you how to avoid the problem. WARNING: A WARNING indicates a potential for property damage, personal injury, or death. © 2013 Dell Inc.
PAGE 3
Contents Notes, Cautions, and Warnings...................................................................................................2 1 Overview.......................................................................................................................................5 Acronyms Used In This Document...........................................................................................................................5 Supported Operating Systems............................................
PAGE 4
PAGE 5
1 Overview This document provides information about the interoperability of the Dell OpenManage software products. The document is primarily divided into two parts: The document is primarily divided into two parts: • Dell OpenManage Software Compatibility Matrix • Dell OpenManage Connections Compatibility Matrix NOTE: Upgrade the OpenManage components to the latest version to effectively use the latest features. For additional information, see the Dell OpenManage Systems Management Support Matrix.
PAGE 6
Acronym Product Name MDSM Modular Disk Storage Manager MN Dell Managed Nodes (Instrumentation and Remote Enablement) OMCI Dell OpenManage Client Instrumentation OME Dell OpenManage Essentials OMSM Dell OpenManage Storage Management SBUU Dell Systems Build and Update Utility SCE Microsoft System Center Essentials SCOM Microsoft System Center Operations Manager SCVMM Microsoft System Center Virtual Machine Manager Server Administrator/OMSA Dell OpenManage Server Administrator SUU Dell S
PAGE 7
Hyper-V for Windows 2008 Hyper-V R2 SP1 for Windows 2008 Citrix XenServer 6.1 For more information on the supported operating systems, Network Interface Cards (NIC) and PowerEdge RAID Controller (PERC), see the Dell Systems Management Software Support Matrix located at www.dell.com/support/ manuals. NOTE: Windows Server 2003 is supported for OMSA only.
PAGE 8
PAGE 9
2 Dell OpenManage Software Compatibility Matrix This section describes the compatibility among the Dell OpenManage products. Compatibility Of Dell Systems Management - Server, Storage Monitoring, Diagnostics And Management Products The following table describes the compatibility of server, storage monitoring, diagnostics, and management products. Table 3.
PAGE 10
Main Product Name Versio n DMC Other product versions required to operate with the main product Server OME Administ rator / OMSA ITA DMC iDRA C 2.0.3 6.5.0-7.1. NA 0* NA NA 1.45-1 1.7-1. .6 8 2.0.2 4.3.0-6.5. NA 0* NA NA 1.1 4.3.0– 6.2.0* NA NA 7.0 - 7.1 NA 6.0 . 0-6.5.0 NA Online 2.2 Diagnosti 2.19.0 cs iDRA C6 (Rack and Towe r) iDRAC 6 (Blad e) iDRA C7 with LC2 CMC BMC MU DUP Lifecy cle Contr oller (LC) 3.2-3.3 1.0.0 with 1.0 3.24.0 4.6 6.5-7. 0 1.5.1 1.45-1 1.5-1. .
PAGE 11
Table 5. Deployment Suite of Products Main Product Name Version iDRAC7 with Lifecycle Controller 2 (LC2) 1.30.30 7.2 with 1.1 1.20.20 with 1.0.8 Lifecycle Controller DTK SBUU Other product versions required to operate with the main product Server iDRAC Administ rator/ OMSA CMC BMC MU DMC iDRAC6 (Rack and Tower) iDRAC6 (Blade) iDRAC7 with LC2 DUP NA 4.3 NA NA NA NA NA 7.2 NA NA 4.0 — 4.2 NA 2.0.3 NA NA NA 7.1 1.5.5 NA NA 3.2 — 4.2 NA 1.1-2.0 1.92 3.42 NA NA 1.5.
PAGE 12
Product Name iDRAC Blade Systems iDRAC6 Rack and Tower Systems iDRAC6 Blade Systems 12 Version Supported Dell Systems Other product versions required to operate with the main product Server Administr ator/ OMSA Lifecycle iDRAC7 Controlle with LC2 r iDRAC6 (Rack and Tower) iDRAC6 (Blade) CMC BMC MU 1.29 or later 1.50 Dell PowerEdge Rack and Tower Systems: xxxx to yx0x 6.2 NA NA NA NA NA 1.60 Dell PowerEdge Systems: yx0x 6.5 - 7.1 NA NA NA NA 3.1 — 4.3 NA 1.
PAGE 13
Product Name iDRAC7 with LC2 CMC BMC MU Version Supported Dell Systems Other product versions required to operate with the main product Server Administr ator/ OMSA Lifecycle iDRAC7 Controlle with LC2 r iDRAC6 (Rack and Tower) iDRAC6 (Blade) CMC BMC MU 3.35 Dell PowerEdge Systems: yx1x Dell PowerVault Servers: yx1x 6.5 - 7.0 1.5.2 NA NA NA 3.1 — 4.3 NA 1.30.30 with 1.1 Dell PowerEdge Systems: yx2x Dell PowerVault Servers: yx2x 7.2 NA NA NA NA 4.30 NA 1.20.20 with 1.0.
PAGE 14
Compatibility Of Dell Embedded Management Products The following table describes the compatibility for Dell embedded management products. Table 7. Embedded Management Products Product Name Version Supported Dell Systems Lifecycle iDRAC7 Controlle with r (LC) LC2 iDRAC6 iDRAC6 CMC (Rack (Blade) and Tower) BMC MU DMC Dell 7.2 PowerEdge Systems: yx1 Dell PowerVault Servers: yx1x 1.5.5 NA NA NA NA 4.6 NA 1.90 Dell 6.5-7.1 PowerEdge Systems: yx1 Dell PowerVault Servers: yx1x 1.5.
PAGE 15
Product Name Version Supported Dell Systems Other product versions required to operate with the main product Server Administ rator / OMSA Lifecycle iDRAC7 Controlle with r (LC) LC2 iDRAC6 iDRAC6 CMC (Rack (Blade) and Tower) BMC MU DMC 1.30.30 Dell with 1.1 PowerEdge Systems: yx2x Dell PowerVault Servers: yx2x 7.2 NA NA NA NA 4.3 NA NA 1.20.20 with 1.0.8 Dell PowerEdge Systems: yx2x Dell PowerVault Servers: yx2x 7.1 NA NA NA NA 4.1 NA NA 1.0.0 Dell with 1.
PAGE 16
NOTE: Using Dell Embedded Management, you can perform out-of-band hardware configuration, operating system deployment, hardware updates, and so on. NOTE: It is recommended to use the latest BIOS available at dell.com/support. Compatibility Of Dell Change Management (Update) Products The following table describes the compatibility for Dell change management products. Table 8.
PAGE 17
Compatibility Of Dell Monitoring Products The following table describes the compatibility of Dell Monitoring Products. Table 9. Monitoring Products Main Product Name Version Server Administrat or/ OMSA DRAC5 iDRAC (Blade Systems) iDRAC6 (Rack and Tower) iDRAC6 (Blade) Server iDRAC Administr ator/ OMSA iDRAC6 (Rack and Tower) iDRAC6 (Blade) iDRAC7 with LC2 CMC ITA DMC OME 7.2 NA 1.65 1.92 3.42 / 3.45 1.30.30 with 1.1 4.30 8.7-8.9 1.1-2.0.3 NA 7.1 NA NA 1.90 3.40 1.20.20 with 1.
PAGE 18
Main Product Name ITA DMC OME Version Other product versions required to operate with the main product Server iDRAC Administr ator/ OMSA iDRAC6 (Rack and Tower) iDRAC6 (Blade) iDRAC7 with LC2 CMC ITA DMC OME 4.1 6.5 – 7.1 NA NA 3.40 1.20.20 with 1.0.8 NA 8.8-8.9 2.0.3 1.0.1 4.0 6.4-7.0 NA NA 3.30 1.0.0 with 1.0 NA 8.8-8.9 2.0.3 1.0 8.9 4.3-7.0* 1.45-1.6 NA NA NA 3.1-3.3 NA NA NA 8.8 4.3-6.4* 1.45-1.6 NA NA NA 3.0-3.1 NA NA NA 2.0.3 6.5-7.1* 1.45-1.6 1.
PAGE 19
Main Product Name Version Other product versions required to operate with the main product LC iDRAC7 with LC2 iDRAC6 (Blade) iDRAC6 (Rack and Tower) 3.35 1.5.2 NA NA NA 3.30 1.5.1 NA NA NA NOTE: It is recommended to use the latest BIOS available at www.dell.
PAGE 20
PAGE 21
Dell OpenManage Integration And Connections Compatibility Matrix 3 This section describes the compatibility of the Dell OpenManage with Dell OpenManage Connections products. Dell Integrations for Operations Manager The following table describes the compatibility for Dell management packs for System Center Operations Manager (OpsMgr)(SCOM)/ System Center Essentials (SCE)/SCVMM. Table 11.
PAGE 22
Connec Suppor tion ted Name Platfor m Versio Supported Dell n Devices Product versions required to operate with the connection Server Adminis trator / OMSA BMC DRAC Manag Tools ement Utility MDS OMCI M SCE 2010 Dell Client Manag ement Pack Dell Printer Manag ement Pack 22 Firmware Versions and Tower CMC 2.1 - 3.0 DRAC/M C 1.5 and 1.6 CMC 1.2, 2.0, 2.01 DRAC/M C 1.43, 1.5, 1.6 SCOM 4.0 2007 SP1, SCOM 2007 R2, SCE 2007 SP1 Dell PowerEdge 5.4 - 6.
PAGE 23
Connec Suppor tion ted Name Platfor m Versio Supported Dell n Devices Product versions required to operate with the connection Server Adminis trator / OMSA BMC DRAC Manag Tools ement Utility MDS OMCI M Firmware Versions NA NA NA NA Dell 5210n Dell 5230n/dn Dell 5310n Dell 5330dn Dell 5350dn Dell 5530dn Dell 5535dn Dell 7330dn SCOM 4.
PAGE 24
Connec Suppor tion ted Name Platfor m Dell EqualLo gic Storage Manag ement Pack Dell MD Storage Arrays Manag ement Pack 24 Versio Supported Dell n Devices Color Laser Printer 3110cn 3010cn 1320c 2130cn 3130cn Mono Laser Multifu nction Printer 1815n 2335dn Color Laser Multifu nction Printer 1235cn 2135cn 2145cn 3115cn Product versions required to operate with the connection Server Adminis trator / OMSA BMC DRAC Manag Tools ement Utility MDS OMCI M Firmware Versions SCOM 4.
PAGE 25
Connec Suppor tion ted Name Platfor m Versio Supported Dell n Devices Product versions required to operate with the connection Server Adminis trator / OMSA BMC DRAC Manag Tools ement Utility MDS OMCI M Firmware Versions version: 7.70 and 7.75 PowerVault MD3600i/MD3620i/ MD3600f/ MD3620f Controller Firmware version: 7.75 Dell Pro Manag ement Pack SCOM 4.
PAGE 26
Connec Suppor tion ted Name Platfor m Versio Supported Dell n Devices Product versions required to operate with the connection Server Adminis trator / OMSA BMC DRAC Manag Tools ement Utility MDS OMCI M Firmware Versions SCVM M 2008 R2 Dell Integrations For Configuration Manager The following table describes the compatibility for Dell integrations for Configuration Manager. Table 12.
PAGE 27
Dell OpenManage Connection For HP Operations Manager The following table describes the compatibility of Dell OpenManage Connection for HP Operations Manager (Smart Plug-in for HPOM). Table 13. Connection for HP Operations Manager Connec Supp Vers Support tion orted ion ed Dell Name Platfo Devices rm Product versions required to operate with the connection Server Administr ator/ OMSA Smart Plug-in for HPOM HPO M 9.0 3.0 6.2.0Dell PowerE 7.1.
PAGE 28
Connec Supp Vers Support tion orted ion ed Dell Name Platfo Devices rm for HPOM Smart Plug-in for HPOM HPO 1.1 M 8.10/8 .16 Product versions required to operate with the connection Server Administr ator/ OMSA Systems : x8xx to yx1x Dell PowerV ault Servers: x8xx to yx1x s Systems) 6.1.0 6.5.0 (Linux Systems) 6.1.0 6.5.0 (ESXi Systems) Dell PowerE dge Systems : x8xx to yx1x DellPow erVault Servers: x8xx to yx1x 5.5.0 6.3.0 (Window s Systems) 6.1.0 6.3.0 (Linux Systems) 6.1.0 6.3.
PAGE 29
Dell OpenManage Connection For CA NSM The following table describes the compatibility for CA NSM Table 15. Connection for CA NSM Connection Name Supported Platform Versi Supported on Dell Devices Dell OpenManage Connection for CA NSM CA NSM r11.2 SP1, CA NSM r11.2 SP2 3.4 CA NSM r11.1 SP2, CA NSM r11.2 CUM1 3.3 Product versions required to operate with the connection Server Administrator/ OMSA Dell 6.1.0 - 6.5.0 PowerEdge Systems: x9xx to yx1x Dell PowerVault Servers: x9xx to yx1x 5.3–6.