Reference Guide

SWC0013
Message Cannot save the LCD Panel Security settings.
Detailed Description An unrecoverable error occurred in the operation while communicating with iDRAC. An
iDRAC reset or power cycle is recommended. Additional information about the failure
may be available in the Lifecycle Log.
Recommended Response
Action
Retry the operation. If the problem persists 1.) Turn off the system and disconnect the
power cord. 2.) Wait five seconds. 3.) Reconnect the power cord and turn on the
system.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0014
Message Cannot set new date and time.
Detailed Description Cannot set new date and time.
Recommended Response Action Exit the wizard and retry, or reboot the system and retry.
Category Configuration
SubCategory SWC = Software Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
SWC0015
Message Operating system installation is not supported on this system.
Detailed Description The selected Operating system installation is not supported on this system.
821