Reference Guide

Recommended Response Action 1. Update the device directly using the update methods since rollback is not
supported for this device. 2. Verify that the target specified in the command is
correct.
Category Updates
SubCategory RED = FW Download
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RED019
Message Reinstall or Rollback cannot be performed since no applicable firmware was found
on the Lifecycle Controller.
Detailed Description Reinstall or Rollback cannot be performed since no applicable firmware was found
on the Lifecycle Controller.
Recommended Response Action Directly update to the desired version.
Category Updates
SubCategory RED = FW Download
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RED020
Message Feature not supported on current version of USC.
Detailed Description The feature invoked is not supported by the current version of the Unified Server
Configurator.
Recommended Response Action Upgrade Unified Server Configurator to the latest available version before using this
feature.
Category Updates
SubCategory RED = FW Download
Severity Severity 2 (Warning)
685