Reference Guide

RAC0238
Message vFlash is currently in-use by another process. Try again later.
Detailed Description vFlash is unable to service the request at this time. Try again later.
Recommended Response Action Try the operation after a few minutes.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC0239
Message SD Card is write-protected.
Detailed Description The contents of a write protected SD Card cannot be modified.
Recommended Response Action Make sure the SD Card is not write-protected before attempting to change its
contents.
Category Audit
SubCategory RAC = RAC Event
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. None
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
RAC024
Message VLAN is Disabled so cannot set VLAN Priority
Detailed Description VLAN is not enbled to be configured
Recommended Response Action Enable VLAN to set VLAN priority
Category Configuration
SubCategory RAC = RAC Event
612