Reference Guide

Detailed Description The current component firmware version is higher than the replaced component
firmware version.
Recommended Response Action No response action is required.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 3 (Informational)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR30
Message Job processing initialization failure.
Detailed Description Operation vailidation was unsuccessful. The command, target and operation data are
all validated before proceeding. If any of them are missing or incorrect the request is
failed.
Recommended Response
Action
Enable the Collect System Inventory on Restart attribute of the Lifecycle Controller
and restart the system. After the system has restarted, retry the operation.
Category Configuration
SubCategory PR = Part Exchange
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE FALSE
PR31
Message Job completed with errors.
Detailed Description All the tasks in the Job were attempted, but some did not complete successfully.
Recommended Response Action Check the Lifecycle Log for more details associated with this warning then retry the
operation if appropriate.
Category Configuration
SubCategory PR = Part Exchange
505