Reference Guide

Recommended Response Action 1.) Turn off the system and disconnect the power cord. 2.) Wait five seconds. 3.)
Reconnect the power cord and turn on the system.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0006
Message Cannot save vFlash Settings.
Detailed Description If a vFlash SD card is not present in the system or if the card is locked, Lifecycle
Controller cannot save the settings.
Recommended Response Action Insert the vFlash SD card and retry, or unlock the vFlash SD card and retry.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 2 (Warning)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
TRUE FALSE FALSE FALSE TRUE FALSE FALSE FALSE FALSE
HWC0007
Message Failed to load vFLASH Settings.
Detailed Description Lifecycle Controller could not obtain the vFlash card information from iDRAC to load
the settings.
Recommended Response
Action
Reinsert the vFlash SD card media and retry the operation. If the problem persists, 1.)
Turn off the system and disconnect the power cord. 2.) Wait five seconds. 3.)
Reconnect the power cord and turn on the system and retry the operation.
Category Configuration
SubCategory HWC = Hardware Config
Severity Severity 2 (Warning)
283