Reference Guide

LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE TRUE FALSE FALSE FALSE
CBL0003
Message Backplane
arg1 connector arg2 disconnected. No cable detected.
Arguments
–
arg1 =
Bay ID
–
arg2 =
Connector Name
Detailed Description None
Recommended Response Action Check backplane configuration. Re-connect cable. If the issue persists, contact
technical support. Refer to the product documentation to choose a convenient
contact method.
Category System Health
SubCategory CBL = Cable
Severity Severity 1 (Critical)
LCD Message No LCD message display defined.
Initial Default. LC Log
Filter
Visibility
IPMI Alert SNMP
Alert
Email
Alert
LC Log LCD Power Off Power
Cycle
Reset
FALSE FALSE FALSE FALSE TRUE TRUE FALSE FALSE FALSE
CBL0004
Message Cable
arg1 is incorrectly connected to backplane arg2 connector arg3 .
Arguments
–
arg1 =
Cable Name
–
arg2 =
Bay ID
–
arg3 =
Connector Name
Detailed Description None
Recommended Response Action Check backplane configuration. Re-connect cable. If the issue persists, contact
technical support. Refer to the product documentation to choose a convenient
contact method.
Category System Health
SubCategory CBL = Cable
Severity Severity 1 (Critical)
176