Dell OpenManage Version 7.
Notes and Cautions NOTE: A NOTE indicates important information that helps you make better use of your computer. CAUTION: A CAUTION indicates potential damage to hardware or loss of data if instructions are not followed. ___________________ Information in this document is subject to change without notice. © 2012 Dell Inc. All rights reserved. Reproduction of these materials in any manner whatsoever without the written permission of Dell Inc. is strictly forbidden.
Contents 1 2 Introduction . . . . . . . . . . . . . . . . . . . . . . . . 5 Other Documents You May Need . . . . . . . . . . . . . 5 Obtaining Technical Assistance . . . . . . . . . . . . . 7 . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
Contents
1 Introduction The Dell OpenManage Port Information document helps system administrators and technicians to identify the ports used by the Dell OpenManage systems management software, standard operating system services, and other agent applications. Other Documents You May Need In addition to this guide, you can access the following guides available at support.dell.com/manuals. On the Manuals page, click SoftwareSystems Management.
• The Dell OpenManage Server Administrator Messages Reference Guide lists the messages that are displayed in your Server Administrator home page Alert log or on your operating system’s event viewer. This guide explains the text, severity, and cause of each Instrumentation Service Alert message that Server Administrator issues.
• The Dell Management Console User’s Guide has information about installing, configuring, and using Dell Management Console. Dell Management Console is a Web-based systems management software that enables you to discover and inventory devices on your network. It also provides advanced functions, such as health and performance monitoring of networked devices and patch management capabilities for Dell systems.
Introduction
2 Ports Table 2-1 lists the ports used by the Dell OpenManage systems management software, standard operating system services, and other agent applications. NOTE: Ports with the right configuration are necessary to allow Dell OpenManage systems management software to connect to a remote device through firewalls. NOTE: The systems management software version mentioned in Table 2-1 indicate the minimum version of the product required to use that port. Table 2-1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable 25 SMTP TCP 1.x No 67,68, 69, PXE 4011 UDP 68 UDP 1.x UDP 53, 80, 135, 137, 139, 150, 1433, 2500 80 None In/Out PXE and DHCP None In/Out TCP HTTP TCP 1.x 135 None In/Out Yes Application launch— PowerConnect Console No Ping TCP/ UDP RPC/DCOM TCP/ 1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level 389 LDAP TCP 1.x 401-402 443 128-bit TCP/ UDP Proprietary/ Symantec Agent, WSMAN 445 TCP 1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level 3389 RDP TCP 1.
Table 2-1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level 623 RMCP UDP 1.x None Configurable In/Out Basic BMC No commands and console redirection Dell OpenManage Client Instrumentation 20 HTTP and FTP TCP 7.x None In/Out Flash BIOS communication No 21 HTTP and FTP TCP 7.x None In/Out Flash BIOS communication No 80 HTTP and FTP TCP 7.
Table 2-1.
Table 2-1.
Table 2-1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable Dell OpenManage IT Assistant 22 SSH TCP 7.x 128-bit In/Out IT Assistant contextual application launch—SSH client Remote software updates to Server Administrator— for systems supporting Linux operating systems Performance monitoring in Linux systems 23 Telnet TCP 7.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level 135 RPC TCP 7.x None In/Out Event reception No through CIM from Server Administrator— for systems supporting Windows operating systems 135 RPC TCP/ 7.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable 623 RMCP UDP 8.0 None In/Out IPMI access through LAN No 1433 Proprietary TCP 7.x None In/Out Optional remote SQL server access Yes 2606 Proprietary TCP 7.x None In/Out Network Yes monitoring service communication port 2607 HTTPS TCP 7.x 128-bit SSL In/Out IT Assistant Web GUI 3389 RDP TCP 7.
Table 2-1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable Dell OpenManage Server Administrator 22 SSH TCP 2.0 128-bit In/Out Remote Server Yes Administrator Command Line (for IT Assistant.) Remote Software Update feature (for Linux operating systems.) 25 SMTP TCP 2.0 None In/Out Optional e-mail No alert messages from Server Administrator 135 RPC TCP/ 2.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable 162 SNMP UDP 1.x, 2.0 None Out SNMP trap event No 443 HTTPS TCP 7.x 128-bit SSL In/Out Remote Yes Management using Web Server to connect to OpenWSMAN/Wi nRM) 445 NetBIOS TCP 2.0 None In/Out Remote software No updates to Server Administrator (for Windows operating systems.) 1311 HTTPS TCP 1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable 22 SSHv2 TCP 1.30 128-bit In/Out Optional Secure Shell (SSH) CLI management Yes 23 Telnet TCP 1.0 None In/Out Optional Telnet CLI management Yes 25 SMTP TCP 1.0 None In/Out Optional e-mail alert messages No 53 DNS UDP 1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable 3269 LDAP for TCP 1.0 global catalog (GC) 128-bit SSL In/Out Optional ADS authentication No 3668 Proprietary TCP 1.0 None In/Out CD or diskette virtual media service Yes 5869 Proprietary TCP 1.0 None In/Out Remote RACADM No spcmp server 5900 Proprietary TCP 1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable 161 SNMP Agent UDP 1.0 None In/Out SNMP query management No 162 SNMP trap UDP 1.0 None Out SNMP trap event No 389 Active TCP 1.0 Directory authenticatio n None In/Out Optional ADS authentication No 443 HTTPS TCP 1.0 128-bit SSL In/Out Web management No GUI and remote racadm CLI utility 636 Active TCP 1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level 53 DNS UDP 1.0 None In/Out Dynamic DNS No registration of host name assigned within DRAC 68 DHCP UDP 1.0 None In/Out DHCP assigned IP address No 69 TFTP UDP 1.0 None In/Out Firmware update through Trivial FTP No 80 HTTP TCP 1.0 None In/Out Web GUI redirected to HTTPS Yes 161 SNMP UDP 1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable 5900 TCP 1.0 128-bit SSL Out Console Yes Redirection:keyboa rd/mouse 5901 TCP 1.0 128-bit SSL In Console Yes Redirection: Video iDRAC 6 1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable iDRAC for Blade Servers 22 Secure Shell (SSH) TCP 1.30 128-bit SSL In/Out Secure CLI management Yes 23 Telnet TCP 1.0 None In/Out Optional Telnetbased CLI management Yes 25 SMTP TCP 1.0 None In/OUt Optional e-mail alert messages No 53 DNS UDP 1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level 3668, 3669 Virtual Media TCP 1.0 Service None-SSL In/Out For the Virtual Media transfer Yes 3670, 3671 Virtual Media TCP 1.0 Secure Service SSL For Virutal Media redirection and transfer Yes 5900 Console TCP 1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol Port Version Maximum Direction Usage Type Encryption Level Configurable 162 SNMP trap UDP 1.0 None Out SNMP trap event No 443 HTTPS TCP 1.0 128-bit SSL In/Out Web management Yes CLI 623 RMCP/RMC UDP 1.0 P+ 128-bit SSL In/Out IPMI over LAN No 636 LDAPS TCP 1.0 128-bit SSL In/Out Optional ADS authentication No 3269 LDAPS for TCP 1.
Table 2-1.
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued) Port # Protocol 5900 Virtual Console Keyboard and mouse redirection, VIrtual Media, Virtual Folders, Remote File Share Port Version Maximum Direction Usage Type Encryption Level Configurable Yes Digital KVM 2068 Proprietary TCP 1.0 128-bit SSL In/Out Video redirection — keyboard/mouse No 3668 Proprietary TCP 1.0 None In/Out Virtual Media No 8192 Proprietary TCP 1.
Ports
