Reference Guide
Supported Systems for VMCLI and iVMCLI
Supported Microsoft Windows Operating Systems for VMCLI and iVMCLI
An X in the operating system column indicates support for the VMCLI and iVMCLI.
Table 4-14.SupportedMicrosoftWindowsOperatingSystemsforVMCLIandiVMCLI
Supported Linux Operating Systems for the VMCLI and iVMCLI
An X in the operating system column indicates support for the VMCLI and iVMCLI utility.
Table 4-15. Supported Linux Operating Systems for VMCLI and iVMCLI
Supported Systems for IPMITool Out-of- Band
BMC Management Utility (BMU) is a utility to access Baseboard Management Controller (BMC) and perform management activities. BMU allows remote, out-of-
band LAN and/or serial port power control, event log access, and console redirection.
IPMItool is a Command Line Interface (CLI) utility that helps in configuring and managing devices using the IPMI version 1.5 and later protocol. IPMItool
supports out-of-band (OOB) access (over a LAN or through the serial port) to a single system at a time. IPMItool also supports in-band access.
For more information on BMU and IPMItool out-of-band, see the Dell OpenManage Baseboard Management Controller Utilities User's Guide available on the Dell
Support website at support.dell.com.
Supported Microsoft Windows Operating Systems for IPMITool Out-of-Band
An X in the operating system column indicates IPMITool out-of-band support.
Hyper-V
Hyper-V R2
Remote RACADM
X
X
Local RACADM
X
X
Windows Server 2003
32-bit
Windows Server 2003
x64
Windows Server 2008
32-bit
Windows Server 2008
x64
Windows Server 2008 R2
x64
Windows XP
Edition
Professional
x86
Service
Pack
SP2
SP2
SP2
SP2
SP3
VMCLI
and
iVMCLI
X
X
X
X
X
SUSE Linux
Enterprise Server
11 x64
SUSE Linux
Enterprise Server
11 x64
SUSE Linux
Enterprise Server
10 x64
Red Hat Enterprise
Linux 5.5 server 32-
bit
Red Hat Enterprise
Linux 5.5 server x64
Red Hat Enterprise
Linux 6.0 server 64-
bit
Edition
Service
Pack
SP1
SP3
VMCLI and
iVMCLI
X
X
X
X
X
X