Release Notes

as the application that runs the script.
3. WSH is the wrong version, is corrupted, or is not installed.
By default, WSH is installed during operating system installation.
To download the current WSH version, go to:
"http://msdn2.microsoft.com/en-us/library/ms950396.aspx "
4. The Scrrun.dll file may not be registered. Register it manually by
running the following command:
"regsvr32 Scrrun.dll"
* During systems management software installation on managed systems or
management stations, if the Pre-req checker displays a blank Internet Explorer
screen, the probable cause is a corrupted Internet Explorer installation.
In such cases, browsing to any site displays the message, "The requested
lookup key was not found in any active activation context." Ensure that you
install Internet Explorer correctly before installing your
systems management software. (289721).
* MSI reference counting takes effect if you install the Intel(R) SNMP agent
using the MSI provided by Intel, and then install the Intel SNMP agent again
using the Dell OpenManage installer. The Intel SNMP agent is not uninstalled
during installation of the MSI; you must remove both installers from
the system to remove the agent.
* A new console window must be opened and CLI commands executed from that
window after an "Unattended Installation" has completed. It is not possible
to execute CLI commands from the same console window on which
Server Administrator is installed.
* If Server Administrator is being installed or uninstalled on a system where
the Web download version of Dell PowerEdge(TM) Diagnostics (version 2.x) or
Dell OpenManage Server Update Utility is running, the Windows Installer service
may display a message stating that specific files needed by Server Administrator
are in use by diagnostics or by the Server Update Utility.
Click "Ignore" and continue. (62159)
* Server Administrator may conflict with the Intel IMB driver. You may
receive an informational message recommending that you uninstall the
Intel IMB driver before installing Server Administrator.
You can do so through the "Device Manager."
Perform the following steps:
1. Open the "Device Manager."
2. Expand the "System devices" list.
3. Right-click the device with a name of the form "IMB Driver "
and select "Uninstall."
4. Click "OK" to uninstall.
If you choose to install Server Administrator while the Intel IMB driver
is being installed, you may have problems running Server Administrator.
Server Administrator services may fail to start or Server Administrator
may have problems accessing sensor data.
* Broadcom/Intel SNMP agent installers are provided by Broadcom/Intel and they