Users Guide

Installing Managed System Software on Supported Linux Operating Systems 99
7 Press <n> to exit. You can start the services manually later.
Using the Custom Install Script To Run in the Silent Mode
The following is an example of a silent custom installation using the
srvadmin-install.sh shell script:
1
Log on as root to the system running the supported Red Hat Enterprise
Linux or SUSE Linux Enterprise Server operating system where you want
to install the managed system components.
2 Insert the Dell Systems Management Tools and Documentation DVD into
the DVD drive.
3 If necessary, mount the DVD using a command such as: mount
/dev/dvdrom /mnt/dvdrom
.
4 Navigate to SYSMGMT/srvadmin/linux/supportscripts .
5 To install the Storage Management Service components, type the
following command.
sh srvadmin-install.sh --storage (these are long options)
or
sh srvadmin-install.sh -s (these are short options)
NOTE: Long options can be combined with short options, and vice-versa.
Server Administrator services do not start automatically.
6 Start Server Administrator services after the installation by using the
command:
sh srvadmin-services start
NOTE: After installing Server Administrator, log out and then log in again to access
the Server Administrator Command Line Interface (CLI).
Dependent RPMs for Remote Enablement
If you choose to install the Remote Enablement feature, you have to install
certain dependent RPMs and configure these RPMs before installing the
feature.
The dependent RPMs are available on the
Dell Systems Management Tools and
Documentation
DVD at srvadmin\linux\RPMS\supportRPMS\opensource-
components\<OS>\<arch>. Install the following RPMs: