Users Guide

Installing Managed System Software on Supported Linux Operating Systems 97
6 Press <c> to copy, <i> to install, <r> to reset and start over, or <q>
to quit. If you press <c>, you are prompted to enter the absolute
destination path.
When the installation is complete, the script will have an option for
starting the services.
7 Press <n> to exit. You can start the services manually later.
Using the Custom Install Script To Run in the Silent Mode
The following is an example of a silent custom installation using the
srvadmin-install.sh shell script:
1
Log on as root to the system running the supported Red Hat Enterprise
Linux or SUSE Linux Enterprise Server operating system where you want
to install the managed system components.
2 Insert the Dell Systems Management Tools and Documentation DVD into
the DVD drive.
3 If necessary, mount the DVD using a command such as: mount
/dev/dvdrom /mnt/dvdrom
.
4 Navigate to SYSMGMT/srvadmin/linux/supportscripts .
5 To install the Storage Management Service components, type the
following command.
sh srvadmin-install.sh --storage (these are long options)
or
sh srvadmin-install.sh -s (these are short options)
NOTE: Long options can be combined with short options, and vice-versa.
Server Administrator services do not start automatically.
6 Start Server Administrator services after the installation by using the
command:
sh srvadmin-services start
NOTE: After installing Server Administrator, log out and then log in again to access
the Server Administrator Command Line Interface (CLI).