Users Guide

Installing Managed System Software on Microsoft Windows Operating Systems 81
Configuring the Windows Firewall for WinRM
1 Open the Control Panel.
2 Click Windows Firewall .
3 Click the Exceptions tab.
4 Select the Windows Remote Management check box. If you do not
see the check box, click the
Add Program button to add Windows Remote
Management.
Configuring the Envelope Size for WinRM
1 Open a command prompt.
2 Ty p e winrm g winrm/config .
3 Check the value of the MaxEnvelopeSizekb attribute. If the value is
less than
4608 , type the following command:
winrm s winrm/config @{MaxEnvelopeSizekb="4608"}
Installing and Upgrading Server Administrator
This section explains how to install the Server Administrator using two
installation options:
• Using the setup program at \SYSMGMT\srvadmin\windows on the
Dell Systems Management Tools and Documentation DVD to install Server
Administrator and other managed system software.
• Using the unattended installation method through the Windows Installer
Engine
msiexec.exe (see Table 7-1) to install Server Administrator and other
managed system software on multiple systems.
NOTE: Simple Network Management Protocol (SNMP) service will be stopped and
started during Systems Management Installation and uninstallation. As a result,
services like DSM IT Assistant Connection Service, DSM IT Assistant Network
Monitor and other third party services, dependent on SNMP will stop. IT Assistant
services will be started at the end of Systems Management Installation or
uninstallation, if the third party services are stopped, these services needs to be
manually restarted.
NOTE: For modular systems, you must install Server Administrator on each server
module installed in the chassis.