Users Guide

Dell OpenManage Security 29
Dell Remote Access Controller (DRAC): DRAC III, DRAC III/XT, ERA, and ERA/O
NOTE: Only iDRAC6 is supported on xx1x systems. For information on iDRAC UDP/TCP
Ports default location,
see the Integrated Dell Remote Access Controller User's
Guide.
21 FTP TCP 1.0 None In/Out Firmware
update
through
FTP and
certificate
upload/down
load
No
23 Telnet TCP 1.0 None In/Out Optional
Telnet-
based CLI
managemen
t
No
25 SMTP TCP 1.0 None In/Out Optional e-
mail alert
messages
No
68 DHCP UDP 1.2 None In/Out DHCP
assigned
IP address
No
69 TFTP UDP 1.0 None In/Out Firmware
update
through
Trivial FTP.
Remote
floppy boot
through
TFTP
No
80 HTTP TCP 1.0 None In/Out Web GUI
redirected
to HTTPS
No
Table 2-1. Dell OpenManage UDP/TCP Ports Default Locations (continued)
Port # Protocol Port
Typ e
Version Maximum
Encryption
Level
Direction Usage Configurable