Users Guide

126 Installing Managed System Software on Supported Linux and VMware ESX
After installing all the base RPMs, execute the autoconf_cim_component.sh
script.
Before executing the autoconf_cim_component.sh script, ensure
Dell OpenManage is installed. For information on installing
Dell OpenManage see, "Installing Managed System Software."
Execute the following command to configure sfbc and openwsman as per
the default configurations:
#./ autoconf_cim_component.sh
Creating Server Certificate for WSMAN
You can either create a new certificate for WSMAN or reuse an existing
certificate.
Creating a New Certificate
You can create a new server certificate for WSMAN by executing the
owsmangencert.sh script located at /etc/openwsman. This script is provided
by the openwsman RPM. Follow the steps in the wizard to create the server
certificate.
Reusing an Existing Certificate
If you have a self-signed or CA-signed certificate, you can use the same
certificate for the openwsman server by updating the ssl_cert_file and
ssl_key_file values, grouped under [server] tag, in
/etc/openwsman/openwsman.conf with your existing certificate values.
Running sfcb and openwsman
Run sfcb and openwsman:
• /etc/init.d/sfcb start
• /etc/init.d/openwsman start
The managed system is configured and is ready to be used by the Server
Administrator Web Server.