Users Guide
56 Setup and Administration
5
Select whether to open an entire network interface or just the SNMP port
on all network interfaces.
a
To open an entire network interface, select one of the
Trusted Devices
and press the spacebar. An asterisk in the box to the left of the device
name indicates that the entire interface will be opened.
b
To open the SNMP port on all network interfaces, select
Other ports
and type
snmp:udp
.
6
Select
OK
and press <Enter>.
The
Firewall Configuration
screen appears.
7
Select
OK
and press <Enter>.
The
Choose a Tool
menu appears.
8
Select
Quit
and press <Enter>.
Configuring the SNMP Agent on Systems Running Supported SUSE Linux
Enterprise Server Operating Systems
Server Administrator uses the SNMP services provided by the ucd-snmp or
net-snmp agent. You can configure the SNMP agent to enable SNMP access
from remote hosts, change the community name, enable Set operations, and
send traps to a management station. To configure your SNMP agent for
proper interaction with systems management applications such as
IT Assistant, perform the procedures described in the following sections.
NOTE: On SUSE Linux Enterprise Server (version 10), the SNMP agent
configuration file is located at /etc/snmp/snmpd.conf.
NOTE: See your operating system documentation for additional details about
SNMP configuration.