Release Notes

Do you want to upgrade Server Administrator to X.Y.Z?
Press ('y' for yes | 'Enter' to exit): "
On pressing 'y', only those Server Administrator packages (in the
above example, "srvadmin-omilcore-X.Y.Z-N" and
"srvadmin-hapi-X.Y.Z-N") residing on the system are upgraded.
If you have to install other Dell OpenManage components as well, you
will have to run the following command once again:
"sh srvadmin-install.sh"
* While upgrading, all installed Server Administrator components,
including ones that are not needed but were previously installed,
will also be upgraded. The upgrade will not attempt to detect and
remove unwanted components.
* Under some conditions with DKMS versions prior to version 2.0.9,
device driver building may fail. This could prevent Server
Administrator from installing. You may see the following
error message:
"Building module:
cleaning build area....(bad exit status: 2)
make KERNELRELEASE=2.6.5-7.232-smp -C src KSP=/lib/modules/
2.6.5-7.232-smp/build MANDIR=%{_mandir}....(bad exit status: 2)
Error! Bad return status for module build on kernel:
2.6.5-7.232-smp (x86_64)
Consult the make.log in the build directory
/var/lib/dkms/e1000/6.2.11/build/ for more information."
To resolve the device driver build problems:
1. Update the DKMS version to 2.0.9 or later.
2. Uninstall the kernel source on your system.
3. Reinstall the kernel source on you system.
4. Build and install the device driver that was failing to
build.
5. If Server Administrator has failed to install, either
install Server Administrator using the following script,
"./srvadmin-install.sh"
OR
install the appropriate Server Administrator RPMs.
(31564) (31829) (42077)
* Most of the RPM packages have been written and tested for Dell
PowerEdge(TM) systems and the Linux versions listed in this readme.
If you try to install the RPM packages on an unsupported system or
an unsupported operating system, you may see unpredictable behavior
during the install, uninstall, or during use of the RPM package.
(68189)