Users Guide

188 Using Microsoft Active Directory
Configuring Active Directory Using CLI on Systems Running Server Administrator
You can use the omconfig preferences dirservice command to configure the
Active Directory service. The productoem.ini file is modified to reflect these
changes. If the adproductname is not present in the productoem.ini file, a
default name will be assigned. The default value will be system name-
software-product name, where system name is the name of the system running
Server Administrator, and software-product name refers to the name of the
software product defined in omprv32.ini (that is, computerName-omsa).
NOTE: This command is applicable only on systems running the Windows
operating system.
NOTE: Restart the Server Administrator service after you have configured Active
Directory.
Table 9-16 shows the valid parameters for the command.
Configuring Active Directory on Systems Running IT Assistant
By default, the Active Directory product name corresponds to the
machinename-ita, where machinename is the name of the system on which IT
Assistant is installed. To configure a different name, locate the itaoem.ini file
in your installation directory. Edit the file to add the line "adproductname=
text" where text is the name of the product object that you created in Active
Directory. For example, the itaoem.ini file will contain the following syntax if
the Active Directory product name is configured to mgmtStationITA.
Table 9-16. Active Directory Service Configuration Parameters
name=value pair Description
prodname=<text> Specifies the software product to which you want to apply
the Active Directory configuration changes. Prodname
refers to the name of the product defined in omprv32.ini.
For Server Administrator, it is omsa.
enable=<true | false> true: Enables Active Directory service authentication
support.
false: Disables Active Directory service authentication
support
adprodname=<text> Specifies the name of the product as defined in the Active
Directory service. This name links the product with the
Active Directory privilege data for user authentication.