Users Guide

Using Microsoft
®
Active Directory
®
191
3 If DHCP is disabled or you want manually to input your DNS IP address,
type the following commands:
racadm config -g cfgLanNetworking -o
cfgDNSServersFromDHCP 0
racadm config -g cfgLanNetworking -o cfgDNSServer1
<
primary DNS IP address >
racadm config -g cfgLanNetworking -o cfgDNSServer2
< secondary DNS IP address>
4 Press <Enter> to complete the Active Directory feature configuration.
See the Dell Remote Access Controller 4 User’s Guide or Dell Remote Access
Controller 5 User’s Guide for more information.
Using Active Directory to Log In To the DRAC 5
You can use Active Directory to log in to the DRAC 5 using one of the
following methods:
• Web-based interface
• Remote RACADM
• Serial or telnet console.
The login syntax is consistent for all three methods:
<username@domain> (or) <domain>\<username> (or)
<domain>/<username>
where username is an ASCII string of 1–256 bytes.
White space and special characters (such as \, /, or @) cannot be used in the
user name or the domain name.