Users Guide

158 Installing Managed System Software on Supported Linux Operating Systems
3 Run the srvadmin-openipmi.sh shell script as shown below. This will build
and install the OpenIPMI driver modules.
sh srvadmin-openipmi.sh install
Reattempt to upgrade the srvadmin-hapi RPM and any RPMs that failed to
upgrade as they depend on the srvadmin-hapi RPM. Perform the steps
described on page 156
Using the srvadmin-install Shell Script
1 Log on as root to the system running Red Hat Enterprise Linux that
requires the upgrade.
2 Insert the Dell Systems Console and Agent CD or the Dell Systems
Management Tools and Documentation
DVD into the CD drive on your
system. If the CD does not mount automatically, type
mount
/dev/cdrom /mnt/cdrom.
3
After the CD mounts, navigate to the subdirectory containing the shell
script on the CD by typing one of the following commands:
cd /mnt/cdrom/srvadmin/linux/supportscripts
cd /media/cdrom/srvadmin/linux/supportscripts
If you are using the DVD, type one of the following commands:
cd
/mnt/cdrom/SYSMGMT/srvadmin/linux/supportscripts
cd
/media/cdrom/SYSMGMT/srvadmin/linux/supportscript
s
4
Run the following script:
sh srvadmin-install.sh
The script detects any previous version of Server Administrator. If a
previous version is installed, a message appears stating the current version
and installed components.