Users Guide

Using the following commands to configure the DRAC 4 Active Directory feature using the racadm CLI instead of the Web-based interface.

1. Open a command prompt and type the following racadm commands:
racadm config -g cfgActiveDirectory -o cfgADEnable 1
racadm config -g cfgActiveDirectory -o cfgADRacDomain <fully qualified rac domain name>
racadm config -g cfgActiveDirectory -o cfgADRootDomain <fully qualified root domain name>
racadm config -g cfgActiveDirectory -o cfgADRacName <RAC common name>
racadm sslcertupload -t 0x2 -f <ADS root CA certificate>
racadm sslcertdownload -t 0x1 -f <RAC SSL certificate>

2. If DHCP is enabled on the DRAC 4 and you want to use the DNS provided by the DHCP server, type the following:
racadm config -g cfgLanNetworking -o cfgDNSServersFromDHCP 1

3. If DHCP is disabled on the DRAC 4, or you want manually to input your DNS IP address, type the following commands:
racadm config -g cfgLanNetworking -o cfgDNSServersFromDHCP 0
racadm config -g cfgLanNetworking -o cfgDNSServer1 <primaryDNSIPaddress>
racadm config -g cfgLanNetworking -o cfgDNSServer2 <secondaryDNSIPaddress>

4. Press Enter to complete the DRAC 4 Active Directory feature configuration.
See the Dell Remote Access Controller 4 User's Guide for more information.
Back to Contents Page
