Users Guide

90 Installing Managed System Software on Red Hat
®
Enterprise Linux Operating Systems
Prerequisites for Installing Managed System Software
You must be logged in as
root
.
The running kernel must have loadable module support enabled.
•Your
/opt
directory must have at least 250 MB of free space, and your
/tmp
and
/var
directories each
must have at least 20 MB of free space. If you choose to use a non-default directory for the installation,
then that directory also must have at least 250 MB of free space.
The ucd-snmp or net-snmp package that is provided with the operating system must be installed. If
you want to use supporting agents for the ucd-snmp or net-snmp agent, you must install the operating
system support for the SNMP standard before you install Server Administrator. For more information
about installing SNMP, see the installation instructions for the operating system you are running on
your system.
NOTE: When installing an RPM package in Red Hat Enterprise Linux, to avoid warnings concerning the
RPM–GPG key, import the key with a command similar to the following:
rpm --import /mnt/cdrom/srvadmin/linux/RPM-GPG-KEY
You must install all the prerequisite RPMs required for successful installation. Please see the Server
Administrator readme file on the
Dell PowerEdge Installation and Server Management
CD.
Installing Managed System Software Using the Dell PowerEdge Installation and Server Management CD
The Dell PowerEdge Installation and Server Management CD uses RPMs to install each component. The
CD is divided into subdirectories to enable easy-to-execute Express Install or Custom Install paths.
If you would like to review the software before you install it, follow this procedure:
1
Load the
Dell PowerEdge Installation and Server Management
CD into your system's CD drive.
2
If necessary, use the command line to mount the CD using a command such as:
mount /mnt/cdrom
3
When you have mounted the CD, you can navigate to it with
cd /mnt/cdrom/srvadmin/linux/
4
Get a listing of the directories with
ls
.
The directories on the CD that pertain to Red Hat Enterprise Linux are the following:
srvadmin/linux
srvadmin/linux/express-install-with-RAC3
srvadmin/linux/express-install-with-RAC4
srvadmin/linux/custom
srvadmin/linux/RPMS
srvadmin/linux/supportscripts